Armasight DKMPRIMDC040001 Prime DC 4x Digital Color Night Vi User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
5
BATTERY INSTALLATION
1) Unscrew the battery compartment cap on the front side o f
the monocular’s body.
2) Insert the CR123A battery into the battery compartment i n
accordance with polarity markings.
3) Screw the cap into place.
TRIPOD INSTALLATION
The Prime DC can be connected to a tripod. To mount the
tripod with the Prime DC device, screw the tripod into
the 1/4’’ threaded socket located on the Prime’s body.
NOTE:
The unit may be badly damaged if the tripod col-
lapses or falls over. Remove the unit from the tri-
pod if it is not within your reach.
3. OPERATION INSTRUCTIONS
CONTROLS
The Prime DC is designed to meet the needs and requirements of various users. Each user can individu-
ally set the unit to the most eective and desirable position with the help of the controls. The Prime DC
unit’s controls and indicators are shown and detailed further, below:
Power Button. This controls the power supply to the unit. Use this marked “ONbutton to turn the
unit on and o.
IR Button. This button controls power supply to the
built-in infrared illuminator. Use this button to turn the IR
illuminator on and o.
Lens Focus. This control focuses the objective lens. Ad-
just the lens for the clearest, sharpest image.
Diopter Adjustment. This control focuses the eye-
piece. Use it to get the clearest image possible on the
IIT screen.
Gain Control Knob. Adjusts the brightness of the image.
Power Indicator. A green PWR light will turn on when the unit is on and ready for operation.
IR Activity Indicator. A red IR light will turn on when the IR illuminator is turned on and ready.
FOCUSING
To focus your Prime DC Monocular, perform the following steps:
1) Adjust the diopter. Turn the diopter adjustment ring clockwise until it stops. While looking through
the eyepiece, observe the scene and slowly begin turning the diopter adjustment ring counterclock-
wise until the image becomes clear and sharp.
2) Adjust the lens’ focus. To focus your monocular at dierent distances, rotate the objective lens focus
ring.
Page view 4
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments